Resources

Info regards to bushing kit fitment for 92-95 Civic EG and 93-97 Del Sol
92-95 Civic EG or 93-97 Del Sol owners, please read the information below, before purchasing a bushing kit.
 
A lot of our customers with 92-95 Civic or 93-97 Del Sol outside the US often tell us that they are not sure which bushing kit they would need.  The truth is that it does not matter what country / region your EG / Del Sol were made or imported to.  It does not matter what model and specs it is, our 6107-EG (92-95 Civic US Spec bushing kit) may not be the kit you need.  
 
You may ask "What kit do I need then?"  To determine the correct bushing kit that you need for your EG Civic / Del Sol, you will need to find out what type of rear lower arms and what size bushings you have on it. 
 
 
There are four type of rear lower arms that you will find on your 92-95 EG Civic / 93-97 Del Sol. 
 
Type 1: Rear lower arm with three bushings, without sway bar mounting point
Bushing Size: 31mm diameter bushings on the outside, and 37mm diameter shock bushing in the middle 
Origin: This type of rear lower arms are usually found on 92-95 Civic US Spec 2 door coupe and 3 door hatchback.
Bushing Kit you need: 6107-EG 92-95 Civic US Spec
 
Type 2: Rear lower arm with three bushings, with sway bar mounting point
Bushing Size: 31mm diameter bushings on the outside, and 37mm diameter shock bushing in the middle 
Origin: This type of rear lower arms are usually found on 92-95 Civic 4 doors that come equipped with OEM rear sway bar from the factory.  
Bushing Kit you need: 6107-EG 92-95 Civic US Spec
 
Type 3: Rear lower arm with three bushings, with sway bar mounting point
Bushing Size: 35mm diameter bushings on the outside, and 37mm diameter shock bushing in the middle
Origin: This type of rear lower arms are usually found on 94-01 Integra GSR / LS / GS / RS models.
Bushing Kit you need: 6107-DC2 94-01 Integra GSR LS
 
Type 4: Rear lower arm with two bushings, with sway bar mounting point, uses eye type rear shock instead of the fork type.
Bushing Size: 30mm diameter bushings
Origin: This type of rear lower arms are usually found on 97-01 Integra Type R models, and some JDM Spec EG6 SiR 
Bushing Kit you need: 6107-DC2R 97-01 Integra